Inconel 600 Pipe Fittings

Inconel Alloy 600 Pipe Fittings • ASTM B366 UNS N06600 • Inconel Pipe Fittings • Inconel Buttweld Fittings

Inconel Alloy 600 Pipe Fittings has been designed in such a way to address a number of factors which enables the pipe fittings to achieve high performance in severe environmental services. A fitting is used in pipe systems to connect straight pipe or tubing sections, adapt to different sizes or shapes and for other purposes, such as regulating fluid flow. Inconel Pipe Fittings are used in a piping system to change direction or function, which is mechanically joined to the system. Inconel 600 Pipe Fittings are manufactured and finished according to international standards ASTM B366 UNS N06600, ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MSS-SP-43 & MSS SP-75. Our range of Inconel 600 buttweld fittings includes Inconel End Cap Pipe Fittings, Inconel Stub Ends Pipe Fittings, Inconel Pipe Nipple Pipe Fittings, Inconel Equal Tee Pipe Fittings, Inconel Unequal Tee Pipe Fittings, Inconel Concentric Reducer Pipe Fittings, Inconel Eccentric Reducer Pipe Fittings, Inconel Collar Pipe Fittings, Inconel Long Radius Elbow Pipe Fittings, Inconel Short Radius Elbow Pipe Fittings, Inconel Long Radius Return Bend Pipe Fittings, Inconel Short Radius Return Bend Pipe Fittings, Inconel Return Bend Pipe Fittings, Inconel Elbow Pipe Fittings, Inconel Coupling Pipe Fittings, etc in all sizes and forms.

Inconel Elbow Pipe Fittings—Inconel 600 Elbow Pipe Fittings are installed between two lengths of pipe or tube allowing a change of direction by 180°, 90° or 45°. The ends are machined for Butt Welding when the two ends differ in size, it is called a Reducer or, Reducing Elbow. Inconel Elbows Pipe Fitting are available as Inconel 600 45° Elbow Pipe Fittings, Inconel 600 90° Elbow Pipe Fittings, Inconel 600 45 Degree Elbow Pipe Fittings, Inconel 600 90 Degree Elbow Pipe Fittings, Inconel 600 1D Elbow Pipe Fittings, Inconel 600 1.5D Elbow Pipe Fittings, Inconel 600 2D Elbow Pipe Fittings, Inconel 600 3D Elbow Pipe Fittings, Inconel 600 5D Elbow Pipe Fittings, Inconel 600 6D Elbow Pipe Fittings, Inconel 600 8D Elbow Pipe Fittings, Inconel 600 10D Elbow Pipe Fittings, Inconel 600 Short Radius Elbow Pipe Fittings, Inconel 600 Long Radius Elbow Pipe Fittings.

Inconel Return Bend Fittings—Inconel Return Bends Pipe Fittings are similar to elbows with different bending radiuses. Inconel 600 Return Bends Pipe Fittings are supplied as Inconel 600 180° Long Radius Return Bends Pipe Fittings, Inconel 600 180° Short Radius Return Bends Pipe Fittings, Inconel 600 180 Degree Long Radius Return Bends Pipe Fittings, Inconel 600 180 Degree Short Radius Return Bends Pipe Fittings.

Inconel Cross Pipe Fiittings—Inconel Cross Pipe Fiittings such as Inconel 600 Equal Cross Pipe Fittings and Inconel 600 Unequal Cross Pipe Fittings are used in several industries for providing the leak free and torque free sealing in any piping or tubing connection known for their close tolerances.

Inconel Cap Pipe Fittings—The function of a Inconel 600 Cap Pipe Fittings is to block off the end of a line in an industrial piping system. Inconel 600 End Cap Pipe Fittings is fitted by placing the end cap over the open line and welding around the joint.

Inconel Tee Pipe Fittings—Inconel Tee Pipe Fittings is widely used in industrial piping systems to merge or divide fluids and do not require special tubing preparation before installation. Inconel Tee Pipe Fittings are available in Inconel 600 Equal Tee Pipe Fittings, Inconel 600 Unequal Tee Pipe Fittings.

Inconel Stub Ends Pipe Fittings—Stub Ends are installed in pairs and mated together with two Lap-Joint Flanges. The surface of the Alloy stub end has a phonographic serrated gasket surface which prevents leakage at the joint. Using stub ends allows sections of the line to be opened for cleaning, inspection or quick replacement, etc, without the need to re-weld.

Inconel Pipe Reducer Fittings—Alloy Reducers are supplied as Eccentric Reducer, Concentric Reducer and Conical Reducer or Bell Shaped Reducer.

Inconel Pipe Coupling—Alloy Couplings are used to merge two equal ends in a piping system. Couplings are classified as half-coupling and full-coupling.

Inconel Pipe Fittings manufactured by Mumbadevi Steel India (MSI) are designed for high performance under extreme environments. Moreover, our Pipe Fittings have wall thickness designed with ample erosion and corrosion allowance .We stock a full range of Inconel 600 pipe fittings in sizes 1/8” NB to 24" NB in SCH5, SCH10, SCH40, SCH80, SCH160, SCH XS, SCH XXS. We have a huge inventory of buttweld fittings in various forms such as End Cap, Stub Ends, Pipe Nipple, Equal Tee, Unequal Tee, Concentric Reducer, Eccentric Reducer, Collar, Long Radius Elbow, Short Radius Elbow, Return Bend, Elbow, Coupling. All our products are tested under expert supervision and test documents such as Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non-Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports are provided. Pipe Fittings have a variety of applications in Oil, Gas, Filtration, Refrigeration, Refining, Petrochemical, and Offshore Industries. We have been exporting buttweld fittings in many countries such as Australia, Saudi Arabia, South Africa, Iraq, Iran, UAE, USA, Russia, Germany, Thailand, etc.

• Pipe Fittings Specification: ASTM B366 UNS N06600, ASME B366 UNS N06600 & En 2.4816
• Dimenison Standards:ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MSS-SP-43, MSS-SP-75
• Thickness Range:2.77mm to 59.64mm
• Outside Diameter(OD):2.77mm to 59.64mm
• Type: Seamless Pipe Fittings, Welded Pipe Fittings
• Forms: Inconel 600 Long Radius Elbow, Inconel 600 Short Radius Elbow, Inconel 600 Long Radius Return Bend, Inconel 600 Short Radius Return Bend, Inconel 600 Reducing Elbow, Inconel 600 End Cap, Inconel 600 Stub Ends, Inconel 600 Pipe Nipple, Inconel 600 Equal Tee, Inconel 600 Unequal Tee, Inconel 600 Pipe Cross, Inconel 600 Reducing Cross, Inconel 600 Cross, Inconel 600 Concentric Reducer, Inconel 600 Eccentric Reducer, Inconel 600 pipe Collar, Inconel 600 Pipe Coupling
• Size Range: 1/8” NB to 24" NB in SCH 5, SCH10, SCH40, SCH80, SCH160, SCH XS, SCH XXS
• Bending Radius: 1D, 1.5D, 2D, 3D, 5D, 6D, 8D, 10D
• Origin: Indian Origin, European Origin, Japanese Origin
• Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
• Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests

Inconel 600 Fittings Sizes in Stock

Properties of Inconel 600 alloy

Inconel 600 Cold Forming

The alloy has low ductility at temperatures between 1200° and 1600°F (650° and 870°C) and should not be worked in that range. High tensile properties can be developed in the material by careful working at temperatures below 1200°F (650°C). Inconel alloy 600 is cold-formed by the standard processes used for steel and stainless steel.

Inconel 600 Hot Forming

The normal hot-working temperature range for Inconel alloy 600 is 1600° to 2250°F (870° to 1230°C). Heavy hot work should be done between 1900° and 2250°F (1040° and 1230°C); light work can be continued down to 1600°F (870°C).

Inconel 600 Machining

Inconel alloy 600 is slightly more machinable than Type 304 stainless steel and slightly less machinable than Type 303 free-machining stainless steel. The alloy is best handled on heavy-duty equipment using cutting tools large and heavy enough to withstand the loads and to quickly dissipate the heat generated. Tools must be sharp and have the proper geometry.

Inconel 600 Welding

Inconel alloy 600 is readily joined by conventional welding processes. Welding materials for joining alloy 600 are Inconel Welding Electrode 182 for shielded metal-arc welding, Inconel Filler Metal 82 for gas tungsten-arc and gas metal-arc welding, and Inconel Filler Metal 82 and INCOFLUX 4 Submerged Arc Flux for the submerged-arc process.Welds made with Inconel Welding Electrode 182 may have decreased ductility after extended exposure to temperatures of 1000° to 1400°F (540° to 760°).

Inconel 600 Heat Treatment

The behavior of the alloy during heating is governed by a number of interacting variables: amount of cold work, grain size, chemical composition, and dimensions of the material. Consequently, times and temperatures for heat treatment are usually experimentally determined.

Services We Offer

Documentation

Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.

Quality Assurance

Nickel Alloy Buttweld Fittings are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.

Material Testing

PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.

Packing and Delivery

The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.