Titanium Grade 1 Pipe Fittings

ASTM B363 UNS R50250 • Titanium Fittings • Titanium Pipe Fittings Suppliers • Titanium Grade 1 Pipe Fittings

Mumbadevi Steel India (MSI) offers Grade 1 Titanium Pipe Fittings at best price. These Titanium Fittings are manufactured as per ASTM B363 and are available in 2.77mm to 59.64mm thickness range.

A fitting is used in pipe systems to connect straight pipe or tubing sections, adapt to different sizes or shapes and for other purposes, such as regulating fluid flow. Pipe Fittings are used in a piping system to change direction or function, which is mechanically joined to the system. The simplest way to achieve this is to bend the pipe in the direction required, but this process will stretch and thin the outer wall of the pipe whilst thickening and wrinkling, the inner wall of the pipe. This results in flow resistance and accelerated wall erosion. Titanium Grade 1 Pipe Fittings are manufactured and finished according to international standards ASTM B363 UNS R50250, ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MSS-SP-43 & MSS SP-75. Our range of ASTM B363 fittings includes Elbows, Tees, Cross, Cap, Reducers, Collars, Bends in all sizes and forms.

Titanium Elbow Fittings—Titanium Pipe Elbows are installed between two lengths of pipe or tube allowing a change of direction by 180°, 90° or 45°. The ends are machined for Butt Welding when the two ends differ in size, it is called a Reducer or, Reducing Elbow. Pipe Fitting Elbows are available as 180° elbows, 90° elbows or 45° elbows in 1D, 1.5D, 2D, 3D, 5D, 6D, 8D, 10D radius as short and long radius elbows. All ASTM B363 elbows are mandrel formed to ensure consistency.

Titanium Return Bend Fittings— Bends are similar to elbows with different bending radiuses. ASTM B363 Bends are supplied as long radius return bends and short radius return bends.

Titanium Pipe Cross Fittings—Pipe Fitting Cross are used in several industries for providing the leak free and torque free sealing in any piping or tubing connection known for their close tolerances.

Titanium Cap Pipe Fittings—The function of a Pipe Cap is to block off the end of a line in an industrial piping system. Pipe Cap is fitted by placing the end cap over the open line and welding around the joint.

Titanium Tee Pipe Fittings—Pipe Fitting Tee is widely used in industrial piping systems to merge or divide fluids and do not require special tubing preparation before installation. Tees are available in different threading specifications and are engineered to close tolerances and precise dimensions.

Titanium Stub Ends Pipe Fittings—Stub Ends are installed in pairs and mated together with two Lap-Joint Flanges. The surface of the stub end has a phonographic serrated gasket surface which prevents leakage at the joint. Using stub ends allows sections of the line to be opened for cleaning, inspection or quick replacement, etc, without the need to re-weld.

Titanium Pipe Reducer Fittings— Reducers are supplied as Eccentric Reducer, Concentric Reducer and Conical Reducer or Bell Shaped Reducer.

Titanium Pipe Coupling— Couplings are used to merge two equal ends in a piping system. Couplings are classified as half-coupling and full-coupling.

Titanium Pipe Fittings manufactured by Mumbadevi Steel India (MSI) are designed for high performance under extreme environments. Moreover, our Pipe Fittings have wall thickness designed with ample erosion and corrosion allowance .We stock a full range of Titanium Grade 1 pipe fittings in sizes 1/8” NB to 24" NB in SCH5, SCH10, SCH40, SCH80, SCH160, SCH XS, SCH XXS. We have a huge inventory of buttweld fittings in various forms such as End Cap, Stub Ends, Pipe Nipple, Equal Tee, Unequal Tee, Concentric Reducer, Eccentric Reducer, Collar, Long Radius Elbow, Short Radius Elbow, Return Bend, Elbow, Coupling. All our products are tested under expert supervision and test documents such as Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non-Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports are provided. Pipe Fittings have a variety of applications in Oil, Gas, Filtration, Refrigeration, Refining, Petrochemical, and Offshore Industries. We have been exporting buttweld fittings in many countries such as Australia, Saudi Arabia, South Africa, Iraq, Iran, UAE, USA, Russia, Germany, Thailand, Uk, etc.

• Pipe Fittings Specification: ASTM B363 UNS R50250, ASME SB363 UNS R50250 & DIN 3.7025
• Dimenison Standards: ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MSS-SP-43, MSS-SP-75
• Thickness Range: 2.77mm to 59.64mm
• Outside Diameter(OD): 2.77mm to 59.64mm
• Type: Seamless Pipe Fittings, Welded Pipe Fittings
• Forms: Titanium Grade 1 Long Radius Elbow, Titanium Grade 1 Short Radius Elbow, Titanium Grade 1 Long Radius Return Bend, Titanium Grade 1 Short Radius Return Bend, Titanium Grade 1 Reducing Elbow, Titanium Grade 1 End Cap, Titanium Grade 1 Stub Ends, Titanium Grade 1 Pipe Nipple, Titanium Grade 1 Equal Tee, Titanium Grade 1 Unequal Tee, Titanium Grade 1 Pipe Cross, Titanium Grade 1 Reducing Cross, Titanium Grade 1 Cross, Titanium Grade 1 Concentric Reducer, Titanium Grade 1 Eccentric Reducer, Titanium Grade 1 pipe Collar, Titanium Grade 1 Pipe Coupling
• Size Range: 1/8” NB to 24" NB in SCH 5, SCH10, SCH40, SCH80, SCH160, SCH XS, SCH XXS
• Bending Radius: 1D, 1.5D, 2D, 3D, 5D, 6D, 8D, 10D
• Origin: Indian Origin, European Origin, Japanese Origin
• Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
• Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests

Titanium Pipe Fittings Sizes in Stock

Properties of Titanium Grade 1 alloy

Titanium Grade 1 Cold Forming

Titanium is similar to moderately tempered austenitic stainless steel. In multiple cold forming operations, intermediate stress relief is recommended. To reattain optimum performance of this material post-work annealing is required.

Titanium Grade 1 Hot Forming

Hot working increases the overall ductility of this Titanium.

Titanium Grade 1 Welding

Titanium is rated well in terms of weldability. Standard welding practices can be carried out easily with this grade.

Services We Offer

Documentation

Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.

Quality Assurance

Titanium Buttweld Fittings are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.

Material Testing

PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.

Packing and Delivery

The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.