ASTM B865 Monel K500 Round Bar Suppliers

ASTM B865 Round Bar

ASTM B865 Round Bar is a precipitation-hardenable nickel-copper material that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.

• ASTM B865 Round Bar
• ASTM B865 Bar
• B865 Round Bar
• B865 Bar

Monel K500 Round Bar

Monel K500 Round Bars is a nickel-chromium alloy bar that contains supplemental amounts of columbium, iron, molybdenum, aluminum, and titanium. Monel K500 Round Bars have high strength properties, heat treatable, good corrosion resistance, formability and weldability. Monel K500 Round Bars is commonly used for valves, fasteners, tubing materials and mandrels. Monel K500 Round Bars has excellent cryogenic and heat ranges. Common uses of Monel K500 include deployment in gas turbines, subservice safety valves, aircraft engines, thrust reversers, and industrial fasteners.

• Monel K500 Round Bar
• Alloy K500 Round Bar
• Monel Alloy K500 Round Bar
• Monel K500 Round Bar
• Monel K500 Bar
• Alloy K500 Bar
• Monel Alloy K500 Bar

ASTM B865 UNS N05500

ASTM B865 covers precipitation hardening bolting material (UNS N05500) and bolting components for high temperature service. Monel K500, AMS 4676 AMS QQN286 ASTM B865, UNS N05500 High Temperature (UNS N05500), Ni 52.5, Cr 19.0 Fe 18.5 Mo 3.0 Nb+Ta 3.6

• ASTM B865 UNS N05500
• B865 N05500
• UNS N05500 ASTM B865
• N05500 B865
• ASTM B865 Round Bar
• UNS N05500 Round Bar

Scope And Manufacturing

ASTM B865 specification covers UNS N05500 nickel-copper-aluminum alloy rounds, squares, hexagons, rectangles, and forgings and forging stocks manufactured by either hot working or cold working, and cold-worked wire. The material should conform to the required mechanical properties in both aged and unaged conditions. Precipitation hardening is accomplished by holding the material at a high temperature, followed by furnace cooling and then air cooling. Monel K-500 is readily fabricated by standard commercial procedures. Welding alloy K-500 is best accomplished by the gas-tungsten-arc welding process. It is recommended that Monel K-500 be annealed when it is welded and that any weldments be stress relieved prior to aging. Heavy machining of this alloy is best accomplished when the material is in the annealed condition or hot-worked and quenched condition. Age-hardened material however can be finish-machined to close tolerances and fine finishes. Therefore, the recommended practice is to machine slightly oversize, age-harden, then finish to size. During aging, a slight permanent contraction takes place, but little warpage occurs because of the low temperatures and slow cooling rates involved.

Mumbadevi Steel India (MSI) has been supplying Monel K500 Round Bars over the years. We also have a huge inventory of Monel 400 Round Bars. Our company has gained recognition globally for the excellence of our services and quality of the products we supply. The products supplied by us are highly corrosion resistant.

---