Incoloy 825 Round Bars
Mumbadevi Steel India (MSI) is a exporter, stockist and suppliers of Incoloy 825 Round Bar. Our entire ASTM B425 UNS N08825 inventory is available in random lengths or can be cut to specific lengths to meet your exact requirements.
Other Names: ASTM B425 UNS N08825, Incoloy Bars, Incoloy 825 Bars, Incoloy Round Bar, Incoloy Hex Bar, Incoloy Square Bar, Incoloy Flat Bar, ASTM B425 Bar
Material: Incoloy 825
Brand: Mumbadevi Steel India (MSI)
Manufacturer: Mumbadevi Steel India (MSI)
ASTM B425 UNS N08825 • Incoloy Round Bar • Incoloy Hex Bar • Incoloy Flat Bar • Incoloy Bar
Incoloy 825 Round Bar supplied by Mumbadevi Steel India (MSI) is of high quality and corrosion resistant. We are a specialist in ASTM B425 UNS N08825 Bars. The ASTM B425 Bars, we supply includes a complete range of alloys that demonstrate high strength and high resistance to heat and corrosion in even the most extreme conditions. We have supplied to almost 70 countries worldwide.
Round bars are most frequently used to make parts such as gears, shafts, axles, and flywheels for rotating machinery applications. Round Bars can also be engineered and used for manufacturing of seamless pipe and tubing used in oil drilling, military, and other applications. Incoloy 825 Round bars conform to ASTM, UNS, ASME, UNS, ANSI, EN standards and specifications. Round Bar is available in a wide variety of sizes ranging from 10 mm to 125 mm. Incoloy Bar available in following forms Round Bar, Hex Bars, Flat Bar, Square Bar. Round bars are typically used in Engineering Construction, Residential Construction, Non-Residential Construction, Mining Infrastructure, Transport and Storage Manufacturing.
Mumbadevi Steel India (MSI) offers a comprehensive range of Incoloy Round Bar which is available in Alloy and Stainless Steel grades. We pride ourselves on supplying Round Bar products to suit your exact requirements. Our Round bars are finished according to, En, BS, ANSI, ASME specifications. The length of the round bar is 50 mm to 6000 mm long and it can be Single Random, Double Random and Cut Length. The characteristics of high resistance to thermal oxidation, corrosion resistance and high strength in our round bar meet the requirements for use in numerous applications within the aerospace, chemical processing, thermal processing, oil & gas, pharmaceutical and bio synthetic and motorsport industries. We supply ASTM B425 round bars with diameters between 0.5 mm to 500 mm.
Our company has been exporting Incoloy 825 Round bars Globally and has attained a recognition in many countries. We have exported to countries like Europe, Australia, Japan, Indonesia, South Africa, Thailand, UAE, Qatar, etc.
- Bar Specification: ASTM B425 UNS N08825, ASME SB425 UNS N08825 & EN 2.4858
- Thickness: 50 mm to 6000 mm Long
- Type: Incoloy Bar
- Form: Incoloy 825 Round Bar, Incoloy 825 Hex Bars, Incoloy 825 Flat Bar, Incoloy 825 Square Bar
- Length: Single Random, Double Random & Cut Length
- Finish: Bright and Black Finish
- Origin: Indian Origin, European Origin, Japanese Origin
- Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
- Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests
Incoloy 825 Alloy Bar Sizes in Stock
|Incoloy 825 Round Bar, Incoloy 825 Flat Bar, Incoloy 825 Hex Bar||0.5 mm to 500 mm||50 mm to 6000 mm Long||Indian, European and Japanese origin|
Forms of ASTM B425 UNS N08825 in Stock
Incoloy 825 Round Bars available in 0.5 mm to 500 mm Diameter
Incoloy 825 Hex Bar ASTM B425 UNS N08825
Incoloy 825 Flat Bar Suppliers and Manufacturer ASTM B425 UNS N08825
C Ti Mn Fe S Si Cr Ni Cu Mo Al MIN - 0.600 - 22.000 - - 19.500 38.000 1.500 2.500 - MAX 0.050 1.200 1.000 - 0.030 0.500 23.500 46.000 3.000 3.500 0.200
(% in 50mm)
MIN 241 586 30.00 MAX 237
Density lb/in³ 0.294 Mg/m³ 8.14 Specific Heat Btu/lb•°F 0.105 J/kg•°C 440 Melting Range °F 2500-2550 °C 1370-1400 Curie Temperature °F <-320 °C <-196 Permeability 200 oersted (15.9 kA/m) 1.005
Properties of Incoloy 825 alloy
Incoloy 825 Cold Forming
Cold-forming properties and practices are essentially the same for Incoloy alloy 825 as for Inconel alloy 600. Although work-hardening rate is somewhat less than for the common grades of austenitic stainless steels, it is still relatively high. Forming equipment should be well powered and strongly built to compensate for the increase in yield strength with plastic deformation.
Incoloy 825 Hot Forming
The hot-working range for Incoloy alloy 825 is 1600 to 2150°F (870 to 1180°C). For optimum corrosion resistance, final hot working should be done at temperatures between 1600 and 1800°F (870 and 980°C). Cooling after hot working should be air cool or faster. Heavy sections may become sensitized during cooling from the hot-working temperature, and therefore be subject to intergranular corrosion in certain media. A stabilizing anneal restores resistance to corrosion. If material is to be welded or subjected to further thermal treatment and subsequently exposed to an environment that may cause intergranular corrosion, the stabilizing anneal should be performed regardless of cooling rate from the hot-working temperature.
Incoloy 825 Machining
All standard machining operations are readily performed on Incoloy alloy 825. The alloy normally has optimum machining characteristics in the annealed temper.
Incoloy 825 Welding
Incoloy alloy 825 has good weldability by all conventional processes. For most applications, Inconel Welding Electrode 112 for shielded metal-arc welding and Inconel Filler Metal 625 for gas-shielded processes are used. For applications that require highest resistance to corrosion, Inco-weld Welding Electrode 686CPT and Inco-weld Filler Metal 686CPT are used.
Incoloy 825 Heat Treatment
Incoloy 825 is stabilise annealed at 940°C. The softest structure is obtained at 980°C. Sections heavier than sheet, strip and wire should be quenched to avoid sensitisation.
Services We Offer
Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.
Incoloy Bars are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.
PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.
Packing and Delivery
The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.