Incoloy 825 Sheet Plates

ASTM B424 UNS N08825 • Incoloy Sheet • Incoloy Plate • Incoloy Alloy Sheet Plate • Incoloy 825 Sheet · Incoloy 825 Plate

Incoloy 825 Sheet Plate supplied by Mumbadevi Steel India (MSI) is of high quality and corrosion resistant. We are a specialist in ASTM B424 UNS N08825 Plates. The ASTM B424 Sheets and Plates, we supply includes a complete range of alloys that demonstrate high strength and high resistance to heat and corrosion in even the most extreme conditions. We have supplied to almost 70 countries worldwide.

Sheet metal is metal formed by an industrial process into thin, flat pieces. It is one of the fundamental forms used in metalworking and it can be cut and bent into a variety of shapes. Countless everyday objects are fabricated from the metal sheet. Plate and sheet are words used to describe the classification of metal depending on its thickness. While sheet metal is less than 3 mm thick, plate metal is obviously thicker than 3 mm. Alloy Plate is used in heavy-duty applications such as those found in the aerospace, military and transportation product manufacturing. Aluminium plate, machined to shape, forms the skins of jets and spacecraft fuel tanks, etc. It is used for storage tanks in many industries, in part because some aluminium alloys become tougher at supercold temperatures. This property is especially useful in holding cryogenic (very-low-temperature) materials.

Incoloy Plate is also used to manufacture structural sections for railcars and ships, as well as armour for military vehicles. In transportation, the metal sheets are used to manufacture panels for automobile bodies and tractor trailers. In building and construction, it is formed into products including siding, gutters, roofing, awnings and carports. Incoloy Sheet Plates are further categorised in following forms:

Incoloy Sheet: If a piece of metal has been rolled out to a thickness greater than that of a foil, but is still less than 6mm it is called sheet.

Incoloy Shim Sheet: A shim is thin and often tapered or wedged piece of metal. Shim Sheet is used to fill small gaps or spaces between objects. Sheet Shims are typically used in order to support, adjust for better fit, or provide a level surface.

Incoloy Rolled Sheet Coil: Sheet Coils are flat products wound into rolls and having a rectangular cross-section, the width of which is much larger than the thickness. Hot Rolled Sheet Coil is produced from semifinished products (slabs or billets), which are reduced to certain thicknesses by rolling and annealing and wound into a roll. Cold Rolled Sheet Coil is produced by removing rust from a hot-rolled sheet by "pickling" it in a weak acid solution, then washing, brushing, drying, oiling and unrolling the sheet and finally performing cold-rolling by passing the sheet through a reducing mill under pressure and winding it into a roll. Cold-rolled steel Coil is a more highly finished product and has a smoother surface, greater dimensional accuracy (thickness, width, length) and greater strength.

Incoloy Rolled Sheet Strips: Sheet Strip is a flat product which, immediately after the final rolling pass or after pickling or continuous annealing is wound into laps so as to form a coil. Strip of Sheet as rolled has slightly convex edges, but it may also be supplied with sheared edges or slit from a wider strip. Wide Strip is a strip of a width 600 mm or over, Whereas, Narrow Strip is a strip of a width less than 600 mm.

Incoloy Plate: Once the metal is more than 6mm thick it is known as plate metal. This type of material is used in circumstances whereby strength and durability are of the utmost importance.

Incoloy Diamond Plate: Diamond plate, also known as a chequered plate, thread plate and floor plate, is a type of metal designed with a regular pattern of raised diamonds or lines on one side, with the reverse side being featureless. Diamond plate is usually stainless steel or alloy.

Mumbadevi Steel India (MSI) offers Incoloy Sheet and Incoloy Plates in a wide range of dimensions. The size range of sheet plate available is 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm. We provide high-quality Incoloy 825 plate and Incoloy 825 sheet conforming to IS, BS, ASTM, UNS specifications for many applications including custom fabrication and construction projects. We are a reliable suppliers of approved pipes, fittings and flanges as well as special items from European, Indian and Japanese origin, approved to Norsok M-650 for the oil and gas sector, shipyards and land-based industry. We have exported Sheet Plates in many countries namely South Africa, Thailand, Indonesia, Australia, Japan, Malaysia, Canada, Brazil, Chile, UK, Saudi Arabia, Qatar, Iran, Sweden, Turkey, Bangladesh, Myanmar, Norway, Omam, etc.

• Sheet Plate Specification: ASTM B424 UNS N08825, ASME SB424 UNS N08825 & EN 2.4858
• Size: 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
• Thickness: 0.1mm to 12 mm Thk
• Type: Incoloy 825 Sheet, Incoloy 825 Plate, Incoloy 825 Coil, Incoloy 825 Flat
• Form: Hot Rolled, Cold Rolled, Perforated, chequered
• Finish:Mirror Finish, BA Finish, 2B Finish, No. 4 Finish
• Origin: Indian Origin, European Origin, Japanese Origin
• Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
• Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests

Incoloy 825 Alloy Sheet Plate Sizes in Stock

Material	Size	Thickness	Specification	Make
Incoloy 825 Plate / Sheet / Flat / Coil	1250 mm x 2500 mm	0.1mm to 12 mm Thk	IS, BS, ASTM, UNS	Indian, European and Japanese origin
	1000 mm x 2000 mm
	1220 mm x 2440 mm (4' x 8')
	1500 mm x 3000 mm
	2000 mm x 2000 mm
	2000 mm x 4000 mm

---

Properties of Incoloy 825 alloy

Incoloy 825 Cold Forming

Cold-forming properties and practices are essentially the same for Incoloy alloy 825 as for Inconel alloy 600. Although work-hardening rate is somewhat less than for the common grades of austenitic stainless steels, it is still relatively high. Forming equipment should be well powered and strongly built to compensate for the increase in yield strength with plastic deformation.

Incoloy 825 Hot Forming

The hot-working range for Incoloy alloy 825 is 1600 to 2150°F (870 to 1180°C). For optimum corrosion resistance, final hot working should be done at temperatures between 1600 and 1800°F (870 and 980°C). Cooling after hot working should be air cool or faster. Heavy sections may become sensitized during cooling from the hot-working temperature, and therefore be subject to intergranular corrosion in certain media. A stabilizing anneal restores resistance to corrosion. If material is to be welded or subjected to further thermal treatment and subsequently exposed to an environment that may cause intergranular corrosion, the stabilizing anneal should be performed regardless of cooling rate from the hot-working temperature.

Incoloy 825 Machining

All standard machining operations are readily performed on Incoloy alloy 825. The alloy normally has optimum machining characteristics in the annealed temper.

Incoloy 825 Welding

Incoloy alloy 825 has good weldability by all conventional processes. For most applications, Inconel Welding Electrode 112 for shielded metal-arc welding and Inconel Filler Metal 625 for gas-shielded processes are used. For applications that require highest resistance to corrosion, Inco-weld Welding Electrode 686CPT and Inco-weld Filler Metal 686CPT are used.

Incoloy 825 Heat Treatment

Incoloy 825 is stabilise annealed at 940°C. The softest structure is obtained at 980°C. Sections heavier than sheet, strip and wire should be quenched to avoid sensitisation.

Services We Offer

Documentation

Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.

Quality Assurance

Incoloy Plate Sheets are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.

Material Testing

PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.

Packing and Delivery

The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.