Monel 400 Sheet Plates

ASTM B127 UNS N04400 • Monel Sheet • Monel Plate • Alloy 400 Sheet and Plate • Monel 400 Sheet, Monel 400 Plate

Mumbadevi Steel India (MSI) supplies a comprehensive range of ASTM B127 specification Monel 400 Sheet and Monel 400 Plate. Our stock of Alloy 400 Sheet and Alloy 400 Plates are available in thickness range 0.1mm to 12 mm Thk. Monel Alloy Sheet and Plates are uesd mainly in high-temperature, seawater and acidic environments.

Sheet metal is metal formed by an industrial process into thin, flat pieces. It is one of the fundamental forms used in metalworking and it can be cut and bent into a variety of shapes. Countless everyday objects are fabricated from the metal sheet. Plate and sheet are words used to describe the classification of metal depending on its thickness. While sheet metal is less than 3 mm thick, plate metal is obviously thicker than 3 mm. Alloy Plate is used in heavy-duty applications such as those found in the aerospace, military and transportation product manufacturing. Aluminium plate, machined to shape, forms the skins of jets and spacecraft fuel tanks, etc. It is used for storage tanks in many industries, in part because some aluminium alloys become tougher at supercold temperatures. This property is especially useful in holding cryogenic (very-low-temperature) materials.

Monel Plate is also used to manufacture structural sections for railcars and ships, as well as armour for military vehicles. In transportation, the metal sheets are used to manufacture panels for automobile bodies and tractor trailers. In building and construction, it is formed into products including siding, gutters, roofing, awnings and carports. Monel Sheet Plates are further categorised in following forms:

Monel Sheet: If a piece of metal has been rolled out to a thickness greater than that of a foil, but is still less than 6mm it is called sheet.

Monel Shim Sheet: A shim is thin and often tapered or wedged piece of metal. Shim Sheet is used to fill small gaps or spaces between objects. Sheet Shims are typically used in order to support, adjust for better fit, or provide a level surface.

Monel Rolled Sheet Coil: Sheet Coils are flat products wound into rolls and having a rectangular cross-section, the width of which is much larger than the thickness. Hot Rolled Sheet Coil is produced from semifinished products (slabs or billets), which are reduced to certain thicknesses by rolling and annealing and wound into a roll. Cold Rolled Sheet Coil is produced by removing rust from a hot-rolled sheet by "pickling" it in a weak acid solution, then washing, brushing, drying, oiling and unrolling the sheet and finally performing cold-rolling by passing the sheet through a reducing mill under pressure and winding it into a roll. Cold-rolled steel Coil is a more highly finished product and has a smoother surface, greater dimensional accuracy (thickness, width, length) and greater strength.

Monel Rolled Sheet Strips: Sheet Strip is a flat product which, immediately after the final rolling pass or after pickling or continuous annealing is wound into laps so as to form a coil. Strip of Sheet as rolled has slightly convex edges, but it may also be supplied with sheared edges or slit from a wider strip. Wide Strip is a strip of a width 600 mm or over, Whereas, Narrow Strip is a strip of a width less than 600 mm.

Monel Plate: Once the metal is more than 6mm thick it is known as plate metal. This type of material is used in circumstances whereby strength and durability are of the utmost importance.

Monel Diamond Plate: Diamond plate, also known as a chequered plate, thread plate and floor plate, is a type of metal designed with a regular pattern of raised diamonds or lines on one side, with the reverse side being featureless. Diamond plate is usually stainless steel or alloy.

Mumbadevi Steel India (MSI) offers Monel Sheet and Monel Plates in a wide range of dimensions. The size range of sheet plate available is 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm. We provide high-quality Monel 400 plate and Monel 400 sheet conforming to IS, BS, ASTM, UNS specifications for many applications including custom fabrication and construction projects. We are a reliable suppliers of approved pipes, fittings and flanges as well as special items from European, Indian and Japanese origin, approved to Norsok M-650 for the oil and gas sector, shipyards and land-based industry. We have exported Sheet Plates in many countries namely South Africa, Thailand, Indonesia, Australia, Japan, Malaysia, Canada, Brazil, Chile, UK, Saudi Arabia, Qatar, Iran, Sweden, Turkey, Bangladesh, Myanmar, Norway, Omam, etc.

• Sheet Plate Specification: ASTM B127 UNS N04400, ASME SB127 UNS N04400, WNR /DIN 2.436, NA13, NiCu30Fe & BS NA 30
• Size: 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
• Thickness: 0.1mm to 12 mm Thk
• Type: Monel 400 Sheet, Monel 400 Plate, Monel 400 Coil, Monel 400 Flat
• Form: Hot Rolled, Cold Rolled, Perforated, chequered
• Finish:Mirror Finish, BA Finish, 2B Finish, No. 4 Finish
• Origin: Indian Origin, European Origin, Japanese Origin
• Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
• Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests

Monel 400 Alloy Sheet Plate Sizes in Stock

Material	Size	Thickness	Specification	Make
Monel 400 Plate / Sheet / Flat / Coil	1250 mm x 2500 mm	0.1mm to 12 mm Thk	IS, BS, ASTM, UNS	Indian, European and Japanese origin
	1000 mm x 2000 mm
	1220 mm x 2440 mm (4' x 8')
	1500 mm x 3000 mm
	2000 mm x 2000 mm
	2000 mm x 4000 mm

---

Properties of Monel 400 alloy

Alloy 400 Cold Forming

Alloy 400 displays excellent cold forming characteristics. Soft Die materials can be used for a better finish.

Alloy 400 Hot Forming

Alloy 400 can be hot-formed into any shape. The Hot working temperature range for this alloy must be between 648-1176°C (1200-2150°F).

Alloy 400 Machining

Alloy 400 can be machined at satisfactory rates with machine tools generally used for iron alloys.

Alloy 400 Welding

Welding Methods for Alloy 400 is similar to austenitic stainless steels. Alloy 400 can easily be joined by gas-tungsten arc, gas metal arc or shielded metal arc processes using appropriate filler metals.

Alloy 400 Heat Treatment

Heat treatment for alloy 400 should be done in a sulfur-free environment. Annealing cycle for alloy 400 should range from 1300 to 1800°F, however, 1600 to 1800°F is most typical.

Services We Offer

Documentation

Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.

Quality Assurance

Monel Plate Sheets are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.

Material Testing

PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.

Packing and Delivery

The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.