Inconel 601 Sheet Plates

ASTM B168 UNS N06601 • Inconel Sheet • Inconel Plate • Inconel Alloy Sheet Plate • Inconel 601 Sheet, Inconel 601 Plate

Mumbadevi Steel India (MSI) is a specialist in exporting high quality Inconel 601 Sheet Plate. We have exported to more than 70 countries worldwide. Our company is ISO 9001:2015 Certified and CRISIL MSE 4 Rated. The Inconel Sheet Plates conform to ASTM B168 UNS N06601 standards and specifications.

Sheet metal is metal formed by an industrial process into thin, flat pieces. It is one of the fundamental forms used in metalworking and it can be cut and bent into a variety of shapes. Countless everyday objects are fabricated from the metal sheet. Plate and sheet are words used to describe the classification of metal depending on its thickness. While sheet metal is less than 3 mm thick, plate metal is obviously thicker than 3 mm. Alloy Plate is used in heavy-duty applications such as those found in the aerospace, military and transportation product manufacturing. Aluminium plate, machined to shape, forms the skins of jets and spacecraft fuel tanks, etc. It is used for storage tanks in many industries, in part because some aluminium alloys become tougher at supercold temperatures. This property is especially useful in holding cryogenic (very-low-temperature) materials.

Inconel Plate is also used to manufacture structural sections for railcars and ships, as well as armour for military vehicles. In transportation, the metal sheets are used to manufacture panels for automobile bodies and tractor trailers. In building and construction, it is formed into products including siding, gutters, roofing, awnings and carports. Inconel Sheet Plates are further categorised in following forms:

Inconel Sheet: If a piece of metal has been rolled out to a thickness greater than that of a foil, but is still less than 6mm it is called sheet.

Inconel Shim Sheet: A shim is thin and often tapered or wedged piece of metal. Shim Sheet is used to fill small gaps or spaces between objects. Sheet Shims are typically used in order to support, adjust for better fit, or provide a level surface.

Inconel Rolled Sheet Coil: Sheet Coils are flat products wound into rolls and having a rectangular cross-section, the width of which is much larger than the thickness. Hot Rolled Sheet Coil is produced from semifinished products (slabs or billets), which are reduced to certain thicknesses by rolling and annealing and wound into a roll. Cold Rolled Sheet Coil is produced by removing rust from a hot-rolled sheet by "pickling" it in a weak acid solution, then washing, brushing, drying, oiling and unrolling the sheet and finally performing cold-rolling by passing the sheet through a reducing mill under pressure and winding it into a roll. Cold-rolled steel Coil is a more highly finished product and has a smoother surface, greater dimensional accuracy (thickness, width, length) and greater strength.

Inconel Rolled Sheet Strips: Sheet Strip is a flat product which, immediately after the final rolling pass or after pickling or continuous annealing is wound into laps so as to form a coil. Strip of Sheet as rolled has slightly convex edges, but it may also be supplied with sheared edges or slit from a wider strip. Wide Strip is a strip of a width 600 mm or over, Whereas, Narrow Strip is a strip of a width less than 600 mm.

Inconel Plate: Once the metal is more than 6mm thick it is known as plate metal. This type of material is used in circumstances whereby strength and durability are of the utmost importance.

Inconel Diamond Plate: Diamond plate, also known as a chequered plate, thread plate and floor plate, is a type of metal designed with a regular pattern of raised diamonds or lines on one side, with the reverse side being featureless. Diamond plate is usually stainless steel or alloy.

Mumbadevi Steel India (MSI) offers Inconel Sheet and Inconel Plates in a wide range of dimensions. The size range of sheet plate available is 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm. We provide high-quality Inconel 601 plate and Inconel 601 sheet conforming to IS, BS, ASTM, UNS specifications for many applications including custom fabrication and construction projects. We are a reliable suppliers of approved pipes, fittings and flanges as well as special items from European, Indian and Japanese origin, approved to Norsok M-650 for the oil and gas sector, shipyards and land-based industry. We have exported Sheet Plates in many countries namely South Africa, Thailand, Indonesia, Australia, Japan, Malaysia, Canada, Brazil, Chile, UK, Saudi Arabia, Qatar, Iran, Sweden, Turkey, Bangladesh, Myanmar, Norway, Omam, etc.

• Sheet Plate Specification: ASTM B168 UNS N06601, ASME SB168 UNS N06601 & EN 2.4851
• Size: 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
• Thickness: 0.1mm to 12 mm Thk
• Type: Inconel 601 Sheet, Inconel 601 Plate, Inconel 601 Coil, Inconel 601 Flat
• Form: Hot Rolled, Cold Rolled, Perforated, chequered
• Finish:Mirror Finish, BA Finish, 2B Finish, No. 4 Finish
• Origin: Indian Origin, European Origin, Japanese Origin
• Testing and Documents: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Test Report, Non Destructive Test Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports
• Packing: Packed in Wooden Boxes, Bubble wraps, Steel Strips Bundled, or as per Customers Requests

Inconel 601 Alloy Sheet Plate Sizes in Stock

Material	Size	Thickness	Specification	Make
Inconel 601 Plate / Sheet / Flat / Coil	1250 mm x 2500 mm	0.1mm to 12 mm Thk	IS, BS, ASTM, UNS	Indian, European and Japanese origin
	1000 mm x 2000 mm
	1220 mm x 2440 mm (4' x 8')
	1500 mm x 3000 mm
	2000 mm x 2000 mm
	2000 mm x 4000 mm

---

Properties of Inconel 601 alloy

Inconel 601 Cold Forming

The rate of cooling following hot-working is not critical with respect to thermal cracking. To avoid sensitization, however, the alloy should be cooled rapidly through the 1000-1400°F (540-760°C) temperature range. Inconel alloy 601 is cold-formed by conventional procedures. The alloy's work-hardening rate, is somewhat higher than the rate for Inconel alloy 600 and INCOLOY alloy 800.

Inconel 601 Hot Forming

The temperature range for hot-forming Inconel alloy 601 is 1600-2250°F (870-1230°C). Hot-working operations involving large deformations should be performed at 1900-2250°F (1040-1230°C). The alloy has low ductility at temperatures from 1200 to 1600°F (650-870°C) and should not be worked in that range. Light working at temperatures below 1200°F (650°C) can be done to develop high tensile properties.

Inconel 601 Machining

All standard machining operations are readily performed on Inconel alloy 601. For the best machinability, the alloy should be in the solution-treated condition.

Inconel 601 Welding

Inconel alloy 601 exhibits good weldability and is readily joined by conventional welding products and processes. Welding products are available which provide high joint efficiencies and heat resistance. The choice of welding product is dependent upon the service conditions to which the fabricated alloy 601 component will be exposed. Tensile properties of joints in Inconel alloy 601 are welded by the shielded-metal-arc, gas-tungsten-arc, and gas-metal-arc processes.

Inconel 601 Heat Treatment

Like other high-nickel alloys, Inconel alloy 601 must be clean before it is heated. All foreign substances such as grease, oil, paint, and shop soil must be removed from the material before a heating operation is performed. The alloy must be heated in a low-sulfur atmosphere. Fuels for open heating must be low in sulfur. To prevent excessive oxidation of the material, the furnace atmosphere should also be slightly reducing. Inconel alloy 601 is not strengthened by heat treatment. Broad ranges of strength and hardness, however, can be achieved with the alloy by the combination of cold work and annealing treatments. The amount of cold work and the section size of the material must be considered in establishing an annealing procedure.

Services We Offer

Documentation

Documentation is a very important part of the products we supply, and we work continuously to enhance the efficiency of the document-handling process without compromising quality of the product. Documents provided along with the shipment include Certificate of Origin, Material Test Certificate as per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates.

Quality Assurance

Inconel Plate Sheets are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFFE. Our products undergo stringent quality tests before they are dispatched.

Material Testing

PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.

Packing and Delivery

The product is wrapped and packed in wooden crates or carton boxes. Our primary goal is to deliver quality products in time, no matter where the client is located.